Monoflo Distribution Dollies

Reviewed by Ryan Penick, Operator, Wholesale Industry LLC · Updated October 2026

DC 2818 specifications

The deck is 28.5 × 18.5 in, sized to locate a 27 × 17 in tote base with a little clearance. It rolls on 4 in casters, a size that crosses dock plates and door thresholds more easily than the 3 in casters common on bakery dollies.

A matched dolly, not a universal one

The DC 2818 is identified for Monoflo 27 × 17 × 12 in attached-lid totes. A tote with a different base may rest on the deck without locking in, and a loaded stack can then shift on a ramp or lift gate. For other tote sizes, send the tote model and the match is checked before you order. Totes are listed under Monoflo attached-lid totes.

Planning a dolly fleet

• Stack height. Set a maximum number of totes per dolly that your people can see over and push safely.
• Working load. Check the rated capacity of the dolly against your heaviest loaded stack.
• Floors. Describe the worst surface on the route: dock plates, parking lots, lift gates.
• Count. Divide totes in circulation by totes per dolly, then add a reserve for dollies sitting at stores.

For tray routes, see bakery dollies; all dolly types are under dollies.

What to include in a request

• Tote model and footprint.
• Caster size and floor conditions.
• Working load and handling requirements.
• Quantity, delivery ZIP and timing.

Request a quote

Send the tote model, dolly quantity and delivery ZIP through request a quote, or call 855-964-2534. These are new factory products made to order: they ship by freight quoted to your ZIP, and the minimum order and lead time are confirmed in the quote.

Frequently asked questions